To run ARC, press Ctrl+A when prompted by the following
message during the system startup:
Press <Ctrl><A> for Adaptec RAID Configuration Utility
If your computer contains two or more controllers, a list of
controllers is displayed. Use the arrow keys to select the controller
you want to configure, then press Enter.
The ARC menu appears, presenting these options:
Array Configuration Utility (ACU)
SATASelect Utility
Disk utilities
To select an option from this menu, or from any of the menus
within ARC, browse with the arrow keys, then press Enter. In
some cases, selecting an option displays another menu. To return
to the previous menu at any time, press Esc.
Using the ACU
With ACU, you can perform these tasks:
Creating Arrays
Managing Arrays
Adding/Deleting Hotspares
Configuring Disk Drives
Rebuilding Arrays
Verifying Drives
Adaptec RAID Configuration Utility
6-2