Advertisement
Quick Links
Advertisement
Related Manuals for Sony XDCA-FS7
Summary of Contents for Sony XDCA-FS7
- Page 1 XDCA-FS7 Update Manual...
- Page 2 How to identify whether your XDCA-FS7 needs an Update Please check the version of the XDCA-FS7 system software, following the procedure listed below. How to check the XDCA-FS7 system software version Connect with PXW-FS7 and XDCA-FS7. Switch ON the POWER of the camera.
- Page 3 How to identify whether your XDCA-FS7 needs an Update How to check the XDCA-FS7 system software version 2.00 VX.XX Former version...
- Page 4 Prepare for the XDCA-FS7 System Software Version Update Please prepare the following equipment other than the camera itself before downloading the update file. Required SD Card Specification • Please use a SDHC card (Speed Class: 4-10/UHS cannot be used/Capacity 2-32GB) or a SD card (File System: FAT16/Capacity: up to 2GB).
- Page 5 Copy the Update XDCA-FS7 System Software to the media (SD/SDHC) Prepare the Media Card Prepare the media card (SD/SDHC) for the update. Format the media card (SD/SDHC) using the camera. Update might not start, if the media is not correctly formatted.
- Page 6 Copy the Update XDCA-FS7 System Software to the media (SD/SDHC) Prepare the Media Card ■How to Format the Media 1. Insert the media into the “UTILITY SD” slot of the camera and turn the POWER ON. 2. Go into “MENU” using the MENU button and select “SD Card” in the “FORMAT MEDIA” menu. Press “SET”...
- Page 7 Copy the Update XDCA-FS7 System Software to the media (SD/SDHC) Copy the update system software onto the Media Card(SD/SDHC) Remove the media card(SD/SDHC) from the camera after formatting the media, and insert it to your PC/Mac. Depending on your PC/Mac environment, execute one of the following procedure to copy the update system software file to the media card.
- Page 8 Update the XDCA-FS7 System Software Caution Please use the AC Adaptor (AC-DN10) during the system software update. If the power of the camera turns off during the system software version update, the camera might not work properly. Please make sure the cable of the AC Adaptor does not detach.
- Page 9 Update the XDCA-FS7 System Software 1. Insert the media card (SD/SDHC) for the system software version update, and turn the POWER ON by turning the “POWER” switch. 2. Go to “Version” in the “System” menu and select “Ext.Unit Version Up”.
- Page 10 Update the XDCA-FS7 System Software 3. Select “Execute” 「Version Upgrade VX.XX > VY.YY」will appear on the screen （X.XX: former version, Y.YY: new version) VX.XX VY.YY If the system software data is not found [Version Upgrade No File] will appear on the screen.
- Page 11 Update the XDCA-FS7 System Software 4. Select “Execute” Version update will begin. Version update will be executed in two phases, Phase 1 and Phase 2. When the version update begins, the REC lamp will start blinking, and [Version Upgrade Elapsed Time XX:YY:ZZ Executing…...
- Page 12 Update the XDCA-FS7 System Software 4. Select “Execute” Caution Between version update Phase1 and Phase2, the camera will reboot and the message on the screen will disappear. Although the message disappears from the screen, version update is still running, do not turn the power off.
- Page 13 Update the XDCA-FS7 System Software 5. Reboot the camera. 6. Check the system software version. 2.00 VY.YY If the System Software Version is not Updated. Please check the procedure and redo the version update again.