Advertisement
Update the XDCA-FS7 System Software
4. Select "Execute"
Caution
Between version update Phase1 and Phase2, the camera will reboot and the message on the
screen will disappear. Although the message disappears from the screen, version update is
still running, do not turn the power off.
段階
目安の所要時間
Once the version up is completed, the REC lamp will turn off and [Version Upgrade Done]
will appear on the screen.
Phase1
When the Version Update Procedure is Terminated
Phase2
If there is a error during the version update, [Version Upgrade NG: Cannot Read. Power
Off] will appear on the screen. Reboot the camera and redo the whole process from the
beginning.
When the Version Update Failed
[Version Upgrade Error!!] will appear on the screen. Redo the whole process from the
beginning. If the error still appears, camera might need repair, please contact your local
Sony service center.
約3分
約9分
Advertisement
