Advertisement
Update the XDCA-FS7 System Software
Caution
Please use the AC Adaptor (AC-DN10) during the system software update.
If the power of the camera turns off during the system software version update, the camera might not work
properly. Please make sure the cable of the AC Adaptor does not detach.
If the media card is ejected during the system software version update, the camera might not work properly.
Please do not eject the media card during the system software version update.
After update is completed, all setup returns to the default settings set at the factory.
Please save only this update file to SD card. Update can not be done with more than one update file in SD
card.
Advertisement
