Story - RGBlink UMS4 plus User Manual

CMD Setting
Shortcut key: Set the command name to F1~F12 (F in
upper case). You can use the F1~F12 shortcut key to
enable the control command. The command name
cannot be repeated.
Move: In the time axis, you can drag the control
command back and forth to change the position.
Delete: Click the selected command icon, you can right
click it to delete, or press the DEL key to delete.

3.5.3 Story

Media Preview
When the timeline is at the start of the media, the
stage window displays the first frame of the media.
When the playback starts, the timeline will move from
the leftmost to the end of the media. When the
playback timeline exceeds the right-most range of the
media, the playback will end and the preview of the
media in the stage window will disappear at the same
.
time
Media play in sequence
When multiple media are arranged in sequence on the
same layer, it will play from left to right. If there is a time
interval between two media, the server will display a
black screen when switching.
This playback setting applies to the continuous
playback of multiple media on a single device.
Multiple media play simultaneously
If the start time of multiple media is the same, it will be
played at the same time, and the end time will be
determined according to the length of media.
This playback setting applies to one device or multiple
devices playing multiple media at the same time
UMS4 plus
.
User Manual
22