Removing and installing the cover plate
Removing the cover plate
1.
Remove the server node (see "Replacing a server node" on page 41).
2.
Remove the four screws (
3.
Lift the cover plate (
Installing the cover plate
1.
Position the cover plate (
CAUTION: Caution! Do not pinch or unplug cables that may be near or under the cover plate.
2.
Secure the cover plate to the server node with four screws (
Hardware removal and installation
) that secure the cover plate to the server node.
) from the server node.
) so that its tabs align with the slots on the server node.
).
45