Table of Contents
Advertisement
Fan holder removal and installation
Removing the fan holder
1.
Remove the fan modules, see "Removing the fan module" on page 38).
2.
Remove the four screws (
3.
Pull up the fan holder (
4.
Repeat steps 2 and 3 to remove the other fan holder.
Installing the fan holder
1.
Align the rubber gasket holes on the fan bracket with the mounting posts on the system chassis.
2.
Insert the fan holder and make sure the mounting posts are properly inserted into the gaskets.
3.
Use four screws to secure the fan braket to the system chasssis.
40
) that secure the fan holder to the system chassis.
) and detach from the system chassis.
Chapter 7
Advertisement
Table of Contents
