Table of Contents
Advertisement
4.
Install the memory module.
a.
Align then insert the DIMM (
b.
Push down the DIMM (
NOTE: The DIMM slot is slotted to ensure proper installation. If you insert a DIMM but it does not fit easily into
the socket, you may have inserted it incorrectly. Reverse the orientation of the DIMM and insert it again.
5.
Reconfigure the system memory. See below for more information.
Memory removal
IMPORTANT:Before removing any DIMM from the mainboard, make sure to create a backup file of all
important data.
1.
Remove the memory module.
a.
Press the holding clips (
b.
Gently pull the DIMM upward (
2.
If you intend to install a new memory module, refer to the previous section.
Reconfiguring the system memory:
The system automatically detects the amount of memory installed. Run the BIOS setup to view the new value
for total system memory and make a note of it.
Hardware removal and installation
) into the socket.
)to the socket until the retaining clips snap inward.
) on both sides of the DIMM slot outward to release the DIMM.
) to remove it from the DIMM slot.
55
Advertisement
Table of Contents
