Replacing the riser card module
Follow these steps:
1.
Remove the server node (see "Replacing a server node" on page 41).
2.
Remove any installed PCI Express card. See "PCI Express card removal and installation" on page
42.
3.
Remove the five screws that attach the riser card module to the server node tray and detach the riser card
module.
4.
Detach the riser card module.
Removing the riser card
1.
Remove the four screws (
2.
Detach the riser card (
Hardware removal and installation
) that secure the riser card to the riser card module.
).
43