Resetting The Device - Kramer KDS-USB2 User Manual
Extremeusb device pairing
Hide thumbs
Also See for KDS-USB2:
- Quick start manual (2 pages) ,
- Quick start manual (2 pages) ,
- User manual (39 pages)
Table of Contents
Advertisement
Resetting the Device
The Reset command only requires the IP of the device to reset.
To reset the device
•
Type xusbnetcfg reset_device <DEVICE IP>
EXAMPLE:
xusbnetcfg reset_device 192.168.1.102
xusbnetcfg reset_device 192.168.1.100
When any device is reset the LEDs will temporarily turn off except for power and then the
device will re-pair.
ExtremeUSB – Operating and Controlling ExtremeUSB
Kramer Electronics Ltd.
16
Advertisement
Table of Contents
