Table of Contents
Advertisement
Industrial Electronic Devices
Insert the IP Address configured in the converter;
Start the Scan by clicking on "Start Scan" button. The window will appear like below:
Figure 9b: "HART Scan" window
When the Scan is complete, the software will show the results. You can import the data by clicking on "OK" button after having
selected the required variables. The results will be displayed as below:
Figure 9c: "HART Scan" window
ADFweb.com S.r.l.
User Manual BACnet Slave / HART Master
Document code: MN67901_ENG
Revision 1.000
Page 27 of 35
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67901-IP-A1 and is the answer not in the manual?
Questions and answers