Power Supply; Camera (Pl Weva); Options; Technical Assistance - Guarantee - Extel WEVA 2 Installation And User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 44
c. Power supply
Adaptor 230 V /5 V
If the power supply cable has to be cut, ensure that the colour coding
of the wires is maintained whenreconnecting.
d. Camera (PL WEVA)
- Reference : 821659
- Dimensions : 160 x 120 x 40 mm
- Operating temperature: -10°C to + 45° approx.
- Camera : C-MOS
- Lens : H : 62°
V : 42°
- Light Sensibility < 8 lux
- Protection of the cameras : IP 44

10. OPTIONS

• All Extel electric catches
• All Extel electric locks
• All Extel mechanisms
• WE 8111 BIS SER.R4

11. TECHNICAL ASSISTANCE - GUARANTEE

Problems
• No function
• The roadside panel rings
but not the monitor
• No sound outside and
inside
• Poor Image
• Impossible to record on
SD card
GB9
1A
Possible Causes
•No power supply
• Pairing problem
• Range problem
• Hole of the microhone
blocked by an insect
• Configuration problem
• Protection problem
If necessary, our technical website is at your disposal www.cfi-extel.com
HOTLINE : 0892-35-00-69
Last version of the dowloadable manual in color on :
CFI EXTEL WEVA 2 - 01/2013
Remedies
• Check the connection of the adaptor
• Check the battery of the monitor is properly
charged (blue led
)
• Check the voltage of the batteries in the elec-
tronic cabinet
• Pair the electronic cabinet with the monitor
• Bring the monitor closer to the electronic
cabinet and check when the device ...
• Clear and gently clean the hole (be sure not
to damage the microphone cell)
• Check the connection of the white or brown
wire on the roadside panel
• Go to the menu and check the video format
(p 8)
• Check the card is not locked or full (see
screen indications p 6-e)
www.cfi-extel.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Db-9038e

Table of Contents