Heartway Medical Products PF7S User Manual page 22

5-15. Adjust Buttons
ITEM
Button
General Display
Mode (TRIP)
Setting Mode
Escape from Setting
Mode
Operation Status
Remarks
SPECIFICATION
"MODE"
M
switch
O
Press SET for 3 seconds to reset TRIP at "00.0".
Press MODE and
D
enter "Setting Mode", then 『Hour：MIN』start flashing.
E
(1) When『Hour』flashing:
Press SET
"Setting Mode" of 『MIN』.
(2) When『MIN』flashing:
Press SET
"Setting Mode" of 『km/h & mph』.
(3) When 『km/h』 or 『mph』flashing
Press SET to choose "km/h" or "mph" type, then press .MODE to
enter "Setting Mode" of 『C / F』
(4) When『C』or『F』flashing
Press SET to choose C or F .
Under setting mode, if below situations happened, will auto save the last
setting value then escape to general operation mode.
(1) No any operation of ADJ button for 20 sec.
(2) Press MODE and
(1) 『Hour：Min』,『km/h』or『mph』,『C』or『F』offer Cyclical Switch
function.
(2) When adjusting 『Hour：Min』, press SET to increase number, if press
SET for more than 2 seconds, the number will increase continuously
until button released, setting value with Cyclical Switch function (only 2
seconds from 0 to 9).
* If『Hour』less than 10, the denary "0" doesn't display.。
Button tones: one short "Bi" sound
Function set
SE
T
SET simultaneously for more than 2 seconds. to
to increase of number, then press
to increase of number, then press
SET at same time for more than 2 sec.
22
MODE to enter
MODE to enter