Table of Contents
Advertisement
5. Change the Tank Plug
a. Remove 'black' shipping Plug from reservoir tank and replace with the 'brass' ventilating Plug - (Figs 8 & 9)
4. Operation
Be sure to read and familiarize yourself with the Safety Instructions at the beginning of this manual. Be sure to wear
gloves, protection glasses and all necessary personal protective equipment. Failure to follow Safety Instructions may
result in property damage, personal injury or death.
4.1 Operating Instructions
Be sure to read and familiarize yourself with the Safety Instructions at the beginning of this manual.
Failure to follow Safety Instructions may result in property damage or personal injury.
To avoid personal injury and/or property damage, permit only trained personnel to operate lift.
ALWAYS use tie downs to secure vehicle to lift while in operation.
1. Lift Preparation:
·
Lift must be fully lowered and area clear of all personnel before vehicles are placed on lift.
2. Loading Lift:
·
Carefully push the vehicle on the fully lowered lift platform while keeping the vehicle centered and aligning
the center of gravity of the equipment with the center of the lift platform. (For motorcycles, push forward
until the front wheel touches the Wheel Stop or engages into the 'optional' mounted Vise or Chock).
Securing ATV - Engage the parking brake on the vehicle, if applicable. Secure ATV to lift using tie-down
straps. Straps are recommended to be used to properly secure ATV to lift platform.
Before attempting to lift any vehicles, be sure that vehicle is stable and properly secured on lift.
Fig. 8
The Lift is now ready for Operation
Oct. 2018
A-2200IEH-XR
Fig. 9
11
Advertisement
Table of Contents
