Before Calling For Service - Breadman TR520R Instruction Manual

BEFORE CALLING FOR SERVICE

Questions
1 Why does the height and shape
of bread differ in each loaf?
2
The bread has an unusual
aroma . Why?
3
The kneading blade comes out
with the bread .
4
The baked loaf of bread has a
floured corner .
5
Why can the timer not be set for
more than 13 hours?
6
Can ingredients be halved or
doubled?
7
Can fresh milk be used in place
of dry milk?
8
Why is the display flashing E00
or E01?
The height and shape of bread may differ
depending on the ingredients, room
temperature and length of the timer cycle .
Also accurate measurement of ingredients is
essential to make delicious bread .
Stale ingredients or too much yeast may have
been used . Always use fresh ingredients .
Accurate measurements are essential to make
delicious bread .
This may happen as the kneading blade is
detachable . Use a non-metal utensil to
remove it .
Caution: The kneading blade will be hot.
Sometimes flour in the corner of the pan may
not have been completely kneaded into the
dough . Scrape the flour off the loaf with a
spatula .
Longer delay times could alter the baking
results .
No . If there is too little in the pan, the knead-
ing blade cannot knead well enough . If there is
too much, bread swells out of the pan .
Yes, for all programs except FAST BAKE ™ .
Be sure to deduct the same measurement
of water to equal liquid substitution (warm to
80°F/27°C) . Fresh milk is not recommended
when using the timer, because it may spoil
while setting in the pan .
The bread machine cavity needs to cool down
before making the next loaf of bread .
22
Answers