User Maintenance Instructions; Cleaning; Storing - Breadman TR520R Instruction Manual

This appliance requires little maintenance . It contains no user serviceable parts . Do not try to repair it
yourself . Any servicing requiring disassembly must be performed by a qualified appliance repair technician .

CLEANING

ALWAYS UNPLUG THE UNIT AND ALLOW TO COOL COMPLETELY BEFORE CLEANING . Never
use vinegar, bleach, or harsh chemicals to clean your Bread Maker .
1 . Unplug and allow to cool before cleaning .
Bread Pan & Kneading Blade
2 .
Remove bread pan from inside the baking chamber and remove the kneading blade from the
bread pan . Wash the bread pan (inside and out) and kneading blade with warm soapy water,
but DO NOT IMMERSE THE BREAD PAN IN WATER OR PUT IT IN A DISHWASHER . If the
kneading blade is stuck to the drive shaft, fill the bread pan with warm, soapy water and let
it stand for up to 30 minutes until loosened (any longer may damage the non-stick surface) .
DO NOT USE EXCESSIVE FORCE .
Do not use steel wool, abrasive cleaners, or metal utensils on the bread pan or kneading blade
as they will damage the non-stick surface . Normal wear is to be expected . The non-stick surface
may discolor over time and in no way affects performance .
Exterior
3 .
Clean the exterior of the Bread Maker with a damp cloth and plastic scouring pad if necessary .
Do not rub too hard as the surface may be scratched .
Interior
4 .
Wipe the inside of the baking chamber with a slightly damp cloth or sponge . A plastic scouring pad
may be used if necessary . Do not rub too hard or the surface may be scratched . Never pour water,
solvents or cleaning solutions into the baking chamber .
Glass Lid
5 .
To clean the glass in the lid, use a glass cleaner or mild detergent and a damp cloth or
plastic scouring pad . Do not use an abrasive cleaner or pad as they might scratch the
glass . If necessary, the lid may be removed for more extensive cleaning . DO NOT PUT THE
LID IN A DISHWASHER OR SOAK IT IN WATER .
6 . Make sure that all removable parts have been thoroughly cleaned and dried before storing .

STORING

All removable parts should be thoroughly cleaned and dried before storing . Reassemble the unit so
that the kneading blade is inside the bread pan, and the bread pan is inside the baking chamber .
Store the Bread Maker with the lid closed .
USER MAINTENANCE
INSTRUCTIONS
21