Quick Sms Configuration - Teltonika FMB120 Quick Manual

Quick SMS configuration

Default configuration has optimal parameters present to ensure
best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
" setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
Note: Before SMS text, two space symbols should be inserted.
GPRS settings:
• 2001 – APN
• 2002 – APN username (if there
are no APN username, empty
field should be left)
2003 – APN password (if there
•
are no APN password, empty
field should be left)
Server settings:
2004 – Domain
•
2005 – Port
•
2006 – Data sending protocol
•
(0 – TCP, 1 – UDP)
Default configuration settings
Movement and ignition detection:
Vehicle movement will
be detected by
accelerometer
Device makes a record On Moving if one of these events happen:
300 seconds passes
Vehicle drives 100
meters
Device makes a record On Stop if:
1 hour passes while
vehicle is stationary
and ignition is off
Records sending to server:
If device has made a
record it is sent to the
server every 120
seconds
After successful SMS configuration, FMB120 device will
synchronize time and update records to configured server.
Time intervals and default I/O elements can be changed by using
Teltonika Configurator
9
Ignition will be detected
by vehicle power voltage
between 13,2 – 30 V
Vehicle turns 10 degrees
Speed difference
between last coordinate
and current position is
greater than 10 km/h
SMS parameters.
or
FMB120 | Wiki