Contents Congratulations! Thank you for choosing one of our appliances. Before you use the appliance, we strongly recommend that you read through the whole user manual which provides important safety instructions and description of the product and the proper use of its functions. To avoid the ever‐present risks involved with using an electrical appliance it is vital that the oven is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards.
Important Safety Instructions IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. In certain circumstances electrical appliances may be a safety hazard. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Appliance Details Voltage & Frequency: 220‐240V 50Hz Lamp Max: 2 x 2W LED Rated Input Power: 194W General Information Before installing and operating the rangehood, carefully read the following important information regarding installation safety and maintenance. Keep this information booklet accessible for further consultations. The appliance has been designed to exhaust cooking fumes externally.
Pre-Installation Ducting The method of ducting should be carefully considered before installing the rangehood. 150mm round ducting should be used in conjunction with this model rangehood. Alternatively, this rangehood can be operated in recirculation mode. Installation Position A. Vertical height from bottom of Rangehood to Fixing Plate mounting screws: 302mm.
Installation Mounting to a stud is recommended. However, if fitted to other wall linings (plasterboard, concrete etc) suitable fixings will be required. Before drilling any holes check that the wall and ceiling are clear of any electrical cables, pipes etc. Pre drill pilot holes in the positions given.
Page 7
Installation Using screws supplied, fix the lower chimney bracket onto lower chimney. Remove the protective plastic covering from all parts including the filters. Hang the rangehood onto the mounting bracket. Connect to the power supply and switch on the power to the rangehood. Check the functions and operations of the switches.
Operating Instructions Controls Power On / Off Speed 1 Speed 2 Speed 3 Lights On / Off Light The light can be operated independently from the fan and is controlled in accordance with the graphics printed above. The fan is operated by turning the power switch on. It can be run at three different speeds (Speed 1 / Speed 2 / Speed 3) depending on the cooking requirements and is controlled in accordance with the graphics printed above.
Chimney Extensions Note: When the maximum chimney height is to be used on the extensions, there will be a minimum of 25mm overlap required for top and bottom chimney assembly.
This warranty is given by: Shriro Australia Pty Ltd ABN 28 002 386 129 Telephone: 1800 648 556 Facsimile: 1800 628 577 Email: customercare@shriro.com.au www.robinhood.com.au Attention: Customer Services Manager Warranty exclusions The warranty does not apply where, in Shriro’s opinion: •...
Need help?
Do you have a question about the RWCT90XCOM and is the answer not in the manual?
Questions and answers