Scanning To A Cloud Connector Profile - Lexmark MX721 User Manual

Scanning
4
Scan the document.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch the flash drive or
the printer in the area shown while actively printing, reading, or writing from the memory device.
Scanning to a Cloud Connector profile
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Cloud Connector.
3
Select a cloud service provider, and then select a profile.
Note: For more information on creating a Cloud Connector profile, see
profile" on page 22.
4
Touch Scan, and then assign a filename and destination folder.
5
Touch Scan Here.
If necessary, change the scan settings.
6
Scan the document.
"Creating a Cloud Connector
75