Page 2
How to Copy? Note: Printers have a default copy settings that is most likely configured to the size commonly used so that changing settings is not necessary. 1. To use copy function - load paper face up on ADF or paper face down on Flatbed. - touch “Copy”...
Page 3
How to load paper on tray? Note: Proper loading of paper on tray can prevent the occurrence of paper jam. Letterhead on tray, face down top edge in front. Letterhead on MP feeder, face up top edge in 1. To load paper on tray 1 - lift the tray slightly, and then pull it out completely squeeze and slide the width and length guide tab to the correct position for the size of the paper - flex the sheets back and forth to loosen them...
Page 4
How to replace supplies? Note: For toner, wait for the printer to prompt “Replace toner cartridge” before replacement. For imaging unit, wait for the printer to prompt “Replace imaging unit” or replace this for dirty printout issues. 1. To replace toner cartridge - open front door by pressing the button at the middle under the touch panel - pull the cartridge out using the handle.
Page 5
How to remove paper jam? 1. Paper jam in cartridge - open front door and remove toner and imaging unit (See supplies guide in page 6) - lift the green flap in front - firmly grasp the jammed paper on each side, and then gently pull it out - reinstall the toner and imaging unit and close front door (See supplies guide) 2.
Need help?
Do you have a question about the MX711de and is the answer not in the manual?
Questions and answers