Dialog Control; Low Frequency Effects; Speaker Virtualizer; Dts Neural:x - Denon AVR-X4700H Owner's Manual

Contents Connections
o Dialog Control
Adjust the volume of dialog in movies, vocals in music, etc. so these
can be heard more easily.
0 – 6 (Default : 0)
0 This can be set when a DTS:X signal that is compatible with the Dialog Control
function is input.
o Low Frequency Effects
Adjust the low frequency effects level (LFE).
-10 dB – 0 dB (Default: 0 dB)
0 This can be set when the LFE signal is included in the input signal.
0 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is
played.
0 For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources: 0 dB
0 DTS movie sources: 0 dB
0 DTS music sources: -10 dB
Front panel Display
Playback Settings
o Speaker Virtualizer
The Speaker Virtualizer enhances the surround and height speaker
channels to create an enveloping virtual surround effect.
On
(Default):
Off:
0 You can set this when the sound mode is "Dolby Atmos", "Dolby Surround" or
sound mode that has "+Dolby Surround" in the sound mode name.
0 Usable when not using height, ceiling or Dolby Atmos Enabled speakers, or
when not using surround speakers.
0 Audio is not output from the surround back speaker if "Speaker Virtualizer" is
set to "On" when "Speaker Config." - "Surr. Back" is set to "1 spkr" in the menu.
o DTS Neural:X
DTS Neural:X Expands the non-object based audio signals and
optimizes them for your speaker configuration.
On
(Default):
Off:
0 You can set this when sound mode is "DTS:X" or "DTS:X MSTR".
185
Rear panel
Tips
Enables "Speaker Virtualizer".
Disables "Speaker Virtualizer".
Use "DTS Neural:X".
Do not use "DTS Neural:X".
Remote Index
Appendix