Tv Format - Denon AVR-X4700H Owner's Manual

Contents Connections

TV Format

Set the video signal format to be output for the TV you are using.
o Format
NTSC
(Default):
PAL:
0 "Format" can also be set by the following procedure. However, the menu
screen is not displayed. Following the display content to make the setting.
1. Press and hold the main unit's STATUS and ZONE3 SOURCE at the same
time for at least 3 seconds.
"zVideo Format <NTSC>" appears on the display.
2. Use the main unit's o or p and set the video signal format.
3. Press the main unit's ENTER to complete the setting.
NOTE
0 When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Front panel Display
Playback
Select NTSC output.
Select PAL output.
Rear panel
Settings
213
Remote
Tips Appendix
Index