Imax; Imax Audio Settings; High Pass Filter - Denon AVR-X4700H Owner's Manual

Contents Connections
o IMAX
Sets the audio mode for IMAX playback.
Auto
(Default):
On:
Off:
0 In case of streaming the IMAX contents from online streaming service using
TV Apps or player Apps (such as Blu-ray player's App), this unit may not
detect the signal as IMAX contents automatically. In this case, you can enable
IMAX mode by setting this parameter to "On" manually.
0 This setting can only be turned "On" when DTS 5.1 channel content recorded
as IMAX DTS is input.
0 This setting cannot be set when headphones are used.
Front panel Display
Playback
Automatically enables the IMAX mode
when IMAX content is detected.
Enables IMAX settings for IMAX
streaming content when automatic
detection is not possible.
Disables the IMAX mode.
Rear panel
Settings
o IMAX Audio Settings
You can configure special IMAX audio settings to recreate the
conditions of an IMAX theater.
Auto
(Default):
Manual:
0 You can set this when sound mode is "IMAX DTS" or "IMAX DTS:X".
0 "Speakers" - "Crossovers", "Bass" - "Subwoofer Mode" and "LPF for LFE" in
the menu cannot be applied during IMAX playback.
o High Pass Filter
Set the high pass filter cutoff frequency for all speakers during IMAX
playback.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
180 Hz / 200 Hz / 250 Hz (Default: 80 Hz)
0 You can set this when "IMAX Audio Settings" is set to "Manual".
186
Remote
Tips Appendix
Applies the optimized speaker settings to
reproduce similar to the IMAX theater
environment.
Manually adjusts the "High Pass Filter",
"Low Pass Filter" and "Subwoofer Mode".
Index