Layout - Denon AVR-X4700H Owner's Manual

Contents Connections
n Layout
Select the height, ceiling, or Dolby Atmos Enabled speaker location.
The layouts that can be selected differ depending on the combinations of "Assign Mode" and "Floor" in the menu. ("Assign Mode" (v p. 230),
"Floor" (v p. 233))
Height Sp Dolby Sp
None
2ch
4ch
None
z1 This can be selected when "Assign Mode" is set to "11.1ch" or "9.1ch" in the menu.
z2 For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup
in place of Surround Height speakers.
z3 This can be selected when "Assign Mode" is set to "11.1ch" or "9.1ch" and "Floor" is set to "5ch & SB" in the menu.
Front panel Display
Playback
Settings
NOTE
None
None
None
z1
2ch
Rear panel
Settings

Layout

-
Front Height (Default)
Top Front
Top Middle
Top Rear
Rear Height
Front Height & Top Middle
Front Height & Top Rear
Front Height & Rear Heightz2
Front Height & Surr. Height
Top Front & Top Rear
Top Front & Rear Height
Top Middle & Rear Height
Front Dolby
Surround Dolby
Back Dolbyz3
234
Remote
Tips Appendix
AUDIO OUT connectors
HEIGHT 1 HEIGHT 2
- -
Front Height -
Top Front -
Top Middle -
Top Rear -
Rear Height -
Front Height Top Middle
Front Height Top Rear
Front Height Rear Height
Front Height Surr. Height
Top Front Top Rear
Top Front Rear Height
Top Middle Rear Height
Front Dolby -
Surround Dolby -
Back Dolby -
Index