Auro-Matic 3D Strength; Auro-3D Mode; Delay Time; Effect Level - Denon AVR-X4700H Owner's Manual

Contents Connections
o Auro-Matic 3D Strength
Changes the level of the up-mixed channels in relation to the original
input signal.
The value ranges from 1 (no up-mixing) to 16 (Maximum level,
providing maximum effect).
1 - 16 (Default:10)
0 You can set this when the sound mode is set to Auro-3D.
0 This cannot be set if the input signal contains Auro-3D signals containing a
Height channel.
o Auro-3D Mode
Select how to output sound to all speakers when Auro-3D decoding is
active.
Channel Expansion
(Default):
Direct:
0 You can set this when the input signal contains Auro-3D signal and sound
mode is set to Auro-3D.
Front panel Display
Playback
Incoming Auro-3D content is expanded to
additional speakers. All speakers
configured for Auro-3D will output sound.
Incoming Auro-3D content is sent directly
to each corresponding channel. No
content is sent to additional speakers.
Rear panel
Settings
o Delay Time
Adjust the audio delay time against video to extend the sound field
image.
0 ms – 300 ms (Default: 30 ms)
0 You can set this when the sound mode is "Matrix".
o Effect Level
Adjust the sound effect level of the current sound mode.
1 – 15 (Default: 10)
0 This item can be set when sound mode is "Rock Arena", "Jazz Club", "Mono
Movie" and "Video Game".
0 Set to a lower level if the positioning and sense of phase of the surround
signals seems unnatural.
188
Remote
Tips Appendix
Index