Hydraulic Lift Control Pedal; Throttle Lever; Parking Brake Pedal - Kubota ZD1011-AU Operator's Manual

22 OPERATING THE MACHINE
2. Start the engine.
See "OPERATING THE ENGINE"
section.
3. Raise the implement.
BHydraulic Lift Control Pedal
The hydraulic lift control pedal is used to raise the mower.
To raise the mower, keep depressing the pedal.
To lower it, release the pedal.

(1) Hydraulic lift control pedal

A Do not operate until the engine is warmed up. If
operation is attempted when the engine is still cold, the
hydraulic system may be damaged.
A Do not operate at slow engine rpm. Move the throttle
lever above 1/2.
A If noises are heard when implement is lifting after the
hydraulic lift control pedal has been activated, the
hydraulic mechanism is not adjusted properly. Contact
your local KUBOTA Dealer for adjustment.
A Do not depress the hydraulic lift control pedal
continuously while operating the machine.
"DOWN": Release the pedal
"UP": Keep depressing the
pedal
4. Accelerate the engine.
BThrottle Lever
Moving the throttle lever backward decreases the engine
speed and moving it forward increases the engine speed.

(1) Throttle lever

5. Unlock the parking brake.
BParking Brake Pedal
To apply the parking brake:
a. Depress the parking brake pedal firmly with your
right foot and the parking brake lock pedal
simultaneously with your left foot.
b. Then release the parking brake pedal while holding
the parking brake lock pedal down.
To release the parking brake:
Depress the brake pedal and release slowly with your
right foot, without pressing the parking brake lock
pedal.
"INCREASE"
"DECREASE"