Cleaning Transmission Strainer; Replacing Fuel Filter; Every 800 Hours; Adjusting Engine Valve Clearance - Kubota ZD1011-AU Operator's Manual

64 MAINTENANCE
BCleaning Transmission Strainer
When changing the transmission fluid, disassemble and
rinse the strainer with nonflammable solvent to completely
clean off filings.
Check O-rings, replace if damaged, cracked or hardened.
When reassembling be careful not to damage the parts.
(1) Strainer
(2) O-ring
(3) Center case cover
A Since the fine filings in the oil can damage the
precision component parts of the hydraulic system, the
end of the suction line is provided with an oil strainer.
BReplacing Fuel Filter
Consult your local KUBOTA Dealer for this service.

EVERY 800 HOURS

BAdjusting Engine Valve Clearance
Consult your local KUBOTA Dealer for this service.

EVERY 1000 HOURS or EVERY 1 YEAR

Replace every 1000 hours or every 1 year whichever
comes faster.
BReplacing Air Cleaner Primary Element
and Secondary Element
(See "Cleaning Air Cleaner Primary Element" in "EVERY
100 HOURS" in "MAINTENANCE" section.)
A To prevent serious damage to the engine, use only a
KUBOTA genuine filter.
[How to remove the secondary element]
1. While turning slightly, pull out the secondary element.
(1) Secondary element

EVERY 1500 HOURS

BChecking Fuel Injection Nozzle (Injection
Pressure)
Consult your local KUBOTA Dealer for this service.