Table of Contents
Advertisement
Standard Reassembly Procedure
This section tells you how to reassemble the system when you need to perform system service.
Please also refer to the disassembly video, if available.
CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it.
Reassemble the Power Button and USB Modules
1.
Reconnect the USB cable to the USB board.
2.
Place the USB board module to the bracket.
3.
Then secure the two screws to fasten it.
4.
Reconnect the power button cable to the power board.
5.
Reconnect the intrusion alarm cable.
6.
Place the power button module to the bracket.
7.
Secure the one screw to fasten the board.
57
Altos G310
Advertisement
Table of Contents
