Reassembly Procedure; Aspire M1610/Veriton M261 Reassembly - Acer Aspire M1610 Service Manual

Hide thumbs Also See for Aspire M1610:
Table of Contents

Advertisement

Reassembly Procedure

Aspire M1610/Veriton M261 Reassembly

NOTE: The only physical difference between the two models is the front bezel as shown in the procedures.
1.
Install the Power-supply by fitting the Power-supply into the chassis, then fasten the four screws shown.
2.
Install the mainboard by aligning the I/O connector with the chassis, making sure the M/B VIA hole fits the
oriented STAND OFF on the chassis. Insert the 6 screws to hold the M/B in place as shown.
3.
Install the CPU.
52
Chapter 3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Veriton m261

Table of Contents