Table of Contents
Advertisement
4.
According the track to insert hard disk drive to the chassis.
5.
Aim at the position to insert the floppy.
6.
Aim at the position to insert the CD-ROM.
7.
Reconnect the IDE cable and power cable to the hard disk drive.
8.
Reconnect the IDE cable and power cable to the floppy.
9.
Reconnect the IDE cable and power cable to the CD-ROM.
10. Attach the front panel to the chassis.
11. Attach the side panel to the chassis.
12. Secure the two screws to fasten the side panel.
Chapter 3
62
Advertisement
Table of Contents
