Table of Contents
Advertisement
Parameter
PS/2 Mouse Support
Wait for "F1" if Error
MPS 1.4 Support
Memory Test
Chapter 2
Description
Default is "Enabled"
Disabled PS/2 device if disabled.
Default is "Enabled". Display below message when
POST error occurred. Wait for 5 seconds and
continuing to boot up.
Press "F1" to continue or F2 to enter BIOS setup.
Display below message and stop continuing the
POST process when POST error occurred.
If you enable this item, the system BIOS MP table will
be compatible with MultiProcessor Specification
version 1.4
Allows BIOS to skip certain tests while booting.
Decreases the time needed to boot the system.
Option
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
36
Advertisement
Table of Contents
