Table of Contents
Advertisement
Remote Access Configuration
The remote access configuration submenu lets you specify settings related to the syste's remote
management features.
Parameter
Remote Access
Serial Port Number
Serial Port Mode
POST-Boot Support
Terminal Type
Chapter 2
Description
Enables or disables remote access.
Selecting Serial enables remote access and opens
a submenu to configuration system parameters.
Default is "COM1" when remote access is set to
"Serial"
COM1 default is 115.2K
COM2 default is 19.2K
Default is "Disabled"
If Enabled, system will keep redirection connection
active after booting to OS.
If Disabled, the connection will be deactivated.
Default is PC-ANSI, which is the standard PC-type
terminal. VT100 works for English as the select
language. VT-UTF8 uses Unicode.
Option
Disabled
Serial
COM1
COM2
115200 8,n,1
57600 8,n,1
19200 8,n,1
Disabled
Enabled
PC ANSI
VT100
VT-UTF8
40
Advertisement
Table of Contents
