Advertisement
Open the door at 90 degrees and keep it steady.
Unscrew the two screws① from the right lower hinge② [Figure 1].
Pull the door ⑤ outwards slowly [follow the arrow direction in Figure 2] to get off
the lower hinge ② and continue to pull the door
⑤
downwards slowly until getting
④
nd take off the lower hinge plate ③ from the door
off from the top right hinge , a
axis hole[Figure 2].
Screw top right hinge④ & right lower hinge ② off from the cabinet⑥ and keep
them in the polybag for needs if you want to change back left opening door in the
future.[Figure 3]
Install the top left hinge⑦ & left lower hinge⑧ to the left side of the cabinet.(⑦
&⑧ delivered in a separated polybag inside the packing carton).[Figure 4]
⑤
③ to the
Turn the door
180 degrees upside down and insert the lower hinge plate
bottom door axis hole. Fit the top door axis hole to the top left hinge⑦ and put
lower hinge plate ③ slowly on the left lower hinge⑧ and keep the door steady.
Screw up the left lower hinge with the plate. Door reversing is finished.
4
Advertisement
