Lennox ComfortSense 7000 Series Programming And Application Manual page 7

Schedule Tab Programming
Days & Events Programming process
Action
1 Press SCHEDULE tab
2 Press EDIT
3 Press NEXT to highlight
the desired grouping of
days
4 Press an event: WAKE
(default), LEAVE,
RETURN, & SLEEP to
select for programming
5 Press UP/DOWN arrows
to select desired
temperature
6 Press FAN repeatedly to
select
desired fan mode
7 Press UP/DOWN arrows
to adjust start time for
selected event
8 Repeat steps 4 − 7 for all remaining events.
(If you selected other than MON TUE WED THU FRI SAT
SUN), continue; otherwise, skip to step 11.
(continued)
Display shows...
SCHEDULE screen
UP/DOWN arrows on
right−hand side of screen;
EDIT changes to CANCEL
Days change to match
selected group, e.g.
MON TUE
WED THU FRI
Filled triangle above event
indicates which event is
selected for change
After change is made, SAVE
appears in the bottom
right−hand of the screen
Fan indicator displays
selection (ON, AUTO, or
CIRC)
Information area displays
start time
9 Press NEXT for the next
group or the next day
10 Repeat steps 3 through 8 for the remaining days, if
necessary.
11 Press SAVE when all
events and
days are programmed as
desired
6
WAKE PERIOD BEGINS
5:OOAM
2
4
Figure 5. Programming days and events
Page 7 ComfortSenset Touch Screen Thermostat
Days change to match
selected group, e.g.
The changes are made and
the schedule screen
reappears.
1
5
7
3
9
SAT SUN
11