Using The Storage Device - StarTech.com SAT2510B12U3 Instruction Manual

Using the Storage Device

Windows 2000/XP/Vista/7
If you are using a brand new hard drive that does not contain any data, then you will
first need to prepare the hard drive for use. From the main desktop, right-click on
"My Computer" ("Computer" in Vista/7), then select Manage. In the new Computer
Management window, select Disk Management from the left window panel.
Locate the Disk that says it is "Unallocated" (check hard drive capacity to confirm it's the
correct hard drive) and then right-click in the section that says "Unallocated" and select
"New Partition".
4
Instruction Manual