Table of Contents
Advertisement
4. Use the provided drive mounting screws to secure the drive to the tray. Use 2
screws on either side of the SATA drive.
5. Insert the drive tray back into the enclosure. Ensure the LED on the drive tray is
aligned with the cutout in the enclosure for the LED.
6. Fasten the screws removed in Step 1 to secure the drive tray to the enclosure.
Driver Installation
No driver installation is required for the supported operating systems, as this hard
drive enclosure is natively supported, so the drivers are already installed.
Instruction Manual
3
Advertisement
Table of Contents
Need help?
Do you have a question about the SAT2510B12U3 and is the answer not in the manual?
Questions and answers