Advertisement
Available languages
Available languages
Replacing LED lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by
authorized personnel only.
VII. TRANSPORTATION AND CHANGING OF POSITION
à The original packages and foamed polystyrene
can be retained if required.
à During transportation, the appliance should be
secured with a wide string or a strong rope.
The instructions written on the corrugated box must
be followed while transporting.
à Before transporting or changing the installation
position, all the moving objects (ie,shelves,crisper...)
should be taken out or fixed with bands in order to prevent them from getting damaged.
VIII. BEFORE CALLING YOUR AFTER SALES SERVICE
If your fridge freezer is not working properly, it may be a minor problem, therefore to save
time and money, check the following, before calling an electrician.
What to do if your appliance does not operate check that:
à There is no power,
à The general switch in your home is disconnected,
à The thermostat setting is on "•" position ,
à The socket is not faulty. To check this, plug the appliance in to another socket which you
know is working.
What to do if your appliance performs poorly check that:
à You have overloaded the appliance,
à The thermostat setting is on position "1" (if so set the thermostat dial to a suitable value).
à The doors are closed properly,
à There is no dust on the condenser,
à There is enough space at the rear and side walls.
If your fridge is operating too loudly
à Normal Noises
à Compressor noise
à Normal motor noise: This noise means that the compressor operates normally
à Compressor may cause more noise for a short time when it starts.
Bubbling noise and splash:
à This noise is caused by the flow of the refrigerant in the tubes of the system.
If you hear any other noises check that:
- The appliance is level
- Nothing is touching the rear of the appliance
- The objects on the appliance are vibrating.
EN - 71
EN
Advertisement
Chapters
