Transportation And Changing Of Installation Position; Repositioning The Door; Before Calling Your After Sales Service - Goddess RCD0170GW8 Instruction Manual

Combi fridge frezeer
Table of Contents

Advertisement

Available languages

Available languages

TRANSPORTATION AND CHANGING OF INSTALLATION POSITION

TRANSPORTATION AND CHANGING OF INSTALLATION POSITION
The original packages and foamed polystyrene (PS) can be
concealed if required.
In transportation the appliance should be tied with a wide stripe
or a strong rope. The rules written on the corrugated box must
be applied while transporting.
Before transporting or changing old installation position, all the
moving objects (i.e., shelves, crisper...) should be taken out or
fixed with bands in order to prevent the shake.

REPOSITIONING THE DOOR

It is not possible to change the opening direction of your fridge door, if the door handles on
your fridge are installed from the front surface of the door.
It is possible to change the opening direction of the door on models without any handles.
If the door opening direction of your fridge may be changed, you should contact the nearest
Authorized Service to have the opening direction changed.

BEFORE CALLING YOUR AFTER SALES SERVICE

If your refrigerator is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money:
What to do if your appliance does not operate;
Check that;
There is no power,
The general switch in your home is disconnected ,
The thermostat setting is on «•» position ,
The socket is not sufficient. To check this, plug in another appliance that you know which is
working into the same socket.
What to do if your appliance performs poorly;
Check that;
You have overloaded the appliance ,
The thermostat setting is "1" position (if so set the thermostat dial suitable value)
The doors are closed perfectly ,
There is no dust on the condenser ,
There is enough place at the rear and side walls.
If your fridge is operating too loudly;
Normal Noises
Compressor noise
Normal motor noise. This noise means that the compressor operates normally
Compressor may cause more noise for a short time when it is activated.
ENG - 35
ENG

Advertisement

Table of Contents
loading

Table of Contents