Table of Contents
Advertisement
Replacing Memory Modules
The NAS has one memory slot. Depending on the model, you can increase the memory capacity of the NAS
by upgrading the memory module. Use only QNAP memory modules to maintain system performance and
stability. You can purchase QNAP memory modules from authorized resellers.
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Power off the NAS.
2. Unplug the power cord from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Remove the drive trays.
a. Pull the tray handle forward.
b. Pull the tray out.
Important
Remember the number of each drive. The drive trays will need to be returned to their original
bays.
5. Remove the case cover.
a. Remove the screws on the back of the NAS that connect the case cover to the chassis.
TS-431X2 User Guide
Installation and Configuration
14
Advertisement
Table of Contents
