Disassembling The Floppy Disk Drive Module - Acer TravelMate 220 Service Manual

Hide thumbs Also See for TravelMate 220:
Table of Contents

Advertisement

10. Pull the floppy disk drive module out from the upper case carefully.

Disassembling the Floppy Disk Drive Module

1.
See "Removing the Battery Pack" on page 49
2.
See "Removing the Hinge Caps" on page 56
3.
See "Removing the Middle Cover" on page 56
4.
See "Removing the Keyboard" on page 57
5.
See "Removing the Cable Cover" on page 57
6.
See "Removing the LCD Module" on page 58
7.
See "Removing the CPU Heat Sink Plate" on page 67
8.
See "Removing the Upper Case" on page 69
9.
See "Removing the Floppy Disk Drive Module" on page 70
10. Remove the two screws from the floppy disk drive bracket and remove the bracket from the drive.
11. To disassemble the floppy disk drive module, first disconnect the floppy disk drive FPC cable from the
drive.
12. Detach the FDD bezel from the drive carefully.
70
Chapter 3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Travelmate 260

Table of Contents