Download  Print this page


Intermittent Problems

Intermittent system hang problems can be caused by a variety of reasons that have nothing to do with a
hardware defect, such as: cosmic radiation, electrostatic discharge, or software errors. FRU replacement
should be considered only when a recurring problem exists.
When analyzing an intermittent problem, do the following:
Run the advanced diagnostic test for the system board in loop mode at least 10 times.
If no error is detected, do not replace any FRU.
If any error is detected, replace the FRU. Rerun the test to verify that there are no more errors.
Chapter 4


Table of Contents

   Related Manuals for Acer TravelMate 220

This manual is also suitable for:

Travelmate 260

Comments to this Manuals

Symbols: 0
Latest comments: