Mounting The Sfp Module; Power On; Chapter 3: Identifying External Components; Front Panel - LevelOne GSW-5150 User Manual

48-port fast ethernet tp + 3-port gigabit ethernet tp/sfp

Hide thumbs Also See for GSW-5150:

Table of Contents

GSW-5150

2.3 Mounting the SFP module

The front panel of the GSW-5150 consists of a SFP module, which support The

Hot Plug- And- Draw. Should fixed the SFP into SFP pluggable when use the SFP

module.The switch could identify and Config the SFP module automatically.

GSW-5150 Switch is powered by AC power supply. Powering on the Switch, it will

automatically initialize and its LED indicators should respond as follows:

1) All of the LED indicators will flash momentarily for one second, which represent

a resetting of the system.

2) The power LED indicator will remain ON.

This Chapter describes the front panel, rear panel and LED indicators of the

Switch.

3.1

The front panel of the GSW-5150 consists of switch LED indicators, 48

10/100Mbps RJ-45 ports ,2 10/100/1000Mbps RJ-45 ports and 1 SFP module.

Figure 3-1 GSW-5150 Switch Front Panel sketch

48-Port Fast Ethernet +3-Port Gigabit

Table of Contents