Boot Options; Boot Sequence; First Hard Disk Drive; Primary Display Adapter - Acer Aspire 7100 System Service Manual

Boot Options

This option allows you to specify your preferred settings for boot-up.
The following screen appears if you select Boot Options from the main menu:

Boot Sequence

1st [Floppy Disk]
2nd [ Hard Disk ]
3rd [ CD-ROM
First Hard Disk Drive ------------ [IDE ]
Fast Boot ------------------------ [
Silent Boot ---------------------- [Disabled]
Num Lock After Boot -------------- [Enabled ]
Memory Test ---------------------- [Disabled]
Configuration Table -------------- [Disabled]
= Move Highlight Bar
Esc = Exit
Boot Sequence
This parameter allows you to specify the boot search sequence. To change the
order of devices, simply press

First Hard Disk Drive

This parameter specifies whether the BIOS utility will boot from an IDE hard disk
drive or a SCSI hard disk drive. The system will automatically boot from an IDE
hard disk if your system does not have a SCSI hard disk drive. The default
setting is IDE.

Primary Display Adapter

Setting this parameter to Onboard enables the onboard video controller.
Normally, the onboard video controller is considered the primary display
adapter. If you installed a video card into your system, set this parameter to
Auto. BIOS will automatically disable the onboard video controller and consider
the video card as the primary display adapter.
32
Boot Options
]
F1 = Help
or
Auto ]
= Change Setting
System Utilities