Installing The P2 With Secc Package Type Processor Into The System Board - Acer Aspire 7100 System Service Manual
Hide thumbs
Also See for Aspire 7100 System:
- Service manual (108 pages) ,
- Manual do utilizador (92 pages) ,
- Manuel d'utilisation (91 pages)
Table of Contents
Advertisement
Installing the P2 with SECC Package Type Processor
into the System Board
1.
Place the retention mechanism over the processor connector on the system
board and press it until it clicks into place.
2.
Press the four plastic rivets to secure the retention mechanism. Make sure
all four of the plastic rivets are firmly inserted into the holes on the system
board.
3.
With the processor module golden fingers pointing downward, align the
processor to the posts of the retention mechanism.
4.
Lower the processor into the processor connector until the golden fingers
touch the connector.
Chapter 3
53
Advertisement
Table of Contents
