Zanussi ZGL 63 IT User Information page 33

pan supports
positioned.
To make burners work properly,
ensure that pan supports are placed
in a way that the arms are centred
upon the burner.
Pay attention when replacing the
pan supports in order to avoid
damaging the hob top.
The Hob Top
Regularly wipe over the hob top
using a soft cloth well wrung out in
warm water to which a little wasing
up liquid has been added. Avoid the
use of the following:
- household detergent and bleaches;
- impregnated pads unsuitable for
non-stick saucepans;
- steel wool pads;
- bath/sink stain removers.
Should the hob top become heavily
soiled, the following products are
recommended:
- For stainless steel hobs use a
proprietary stainless steel cleaner.
- For other hobs use Hob Brite or Bar
Keepers Friend.
Do not leave acid or alkaline
substances (e.g. vinegar, salt,
lemon juice, etc.) on the cooktop.
The Ignition electrode
The electric ignition is obtained
through a ceramic electrode with a
metal electrode inside (Fig 1- C). Keep
these components very clean, to avoid
difficult lighting, and check that the
burner crown holes (Fig 1 - B) are not
obstructed.
are correctly
33