English Important Safety Information These warnings are provided in the interest of safety. You read them carefully before MUST installing or using the appliance. About Installation, Cleaning and Manteinance • It is mandatory that all operations required for the be kept clean at all times. A build-up of fats or other installation are carried out by a qualified or competent foodstuff could result in a fire.
Contents For the Installer For the User Important Safety Information Technical Data Instruction for the User Instruction for the Installer Cleaning and Maintenance Electrical Connection Adaptation to different types of gas Building In MANUFACTURER: This appliance complies with the following ELECTROLUX HOME PRODUCTS ITALY S.p.A.
Using the hob correctly To ensure maximum burner efficiency, it is strongly Burner minimum maximum recommended that you use only pots and pans with a diameter diameter bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel. Big (rapid) 160 mm.
Cleaning and Maintenance Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. General cleaning Wash the enamelled components with warm soapy water. Never use abrasive cleaners. Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food.
1,0 kW Electric Supply Appliance Class 230 V 50 Hz Category II 2H3+ Setting Hob recess dimensions ZGL 66: Natural gas G 20 / 20 mbar Length 550 mm. ZXL 66: LPG G30/G31 28-30/37 mbar Width 470 mm. Gas connection G 1/2"...
Electrical Connection The appliance is designed to be connected to 230 V RIGID COPPER PIPE OR monophase electricity supply. TUBO RIGIDO IN RAME FLEXIBLE PIPE IN STAINLESS O FLESSIBILE IN STEEL ACCIAIO INOX The connection must be carried out in compliance with the laws and regulations in force.
Adaptation to different types of gas Injectors replacement • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table 2). •...
Building In Mod. ZXL 66 Mod. ZGL 66 These hobs can be inserted in a built-in kitchen unit Dimensions are given in millimeters whose depth is between 550 and 600 mm. The hobs dimensions are shown in the relevant diagram.
Possibilities for insertion Kitchen unit with door Kitchen unit with oven Proper arrangements must be taken in designing the The hob recess dimensions must comply the indication forniture unit, in order to avoid any contact with the given in Figs. 12 and 13 and must be provided with bottom of the hob which can be heated when it is brackets to allow a continuous supply of air.