ENGLISH Important Safety Information These warnings are provided in the interest of safety. You read them carefully before MUST installing or using the appliance. It is most important that this instruction book should be retained with the appliance for future reference.
Contents Important Safety Information Instruction for the User Maintenance and Cleaning Service and original spare parts Technical Data Instruction for the Installer Electrical connection Adaptation to different types of gas Building In Guide to Use the instructions The following symbols will be found in the text to guide you throughout the Instructions: Safety Instructions ! ! ! ! !
Instruction for the User Hob Burners Control Knobs The hob burners control knobs are situated on the hob front panel. The symbols on the knobs mean that : there is no gas supply " there is maximum gas supply there is minimum gas supply Lighting the Burners •...
Maintenance and Cleaning Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. Wash the enamelled components with warm soapy water. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. The pan supports are dishwasher proof.
Service and original spare parts Original spareparts, certified by This machine, before leaving the factory, has been the product manufacturer and tested and studied by many experts and specialists, in carrying this symbol are only order to give you the best results. available at our Service Centre and authorized spareparts Any repair work which needs to be carried out should...
Instruction for the Installer The following instructions about installation and " " " " " maintenance must be carried out by qualified personnel in compliance with the regulation in force. The appliance must be electrically disconnected " " " " " before all interventions.
Electrical connection The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1) check that the main fuse and the domestic installation can support the load (see the rating label);...
Adaptation to different types of gas ! ! ! ! ! Injectors replacement Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the • injectors (Fig. 5), and replace them with the ones required for the type of gas in use (see Table "injectors").
Building In Fig. 7 A = Auxiliary burner SR = Semi-rapid burner R = Rapid Burner The hob can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hob dimensions are shown in Fig. 7. Installation and Assembly The hob can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in Fig.
Page 11
Possibilities for insertion Kitchen unit with door Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig. 10. The panel fitted under the hob should be easily removable to allow an easy access if a technical assistance intervention is...