Sanitas SBM 22 Instructions For Use Manual page 24

There are two different ways to access the menu from
which you can adjust the settings:
• Before initial use and after each time you replace the
battery:
When inserting batteries into the device, you will be
taken to the relevant menu automatically.
• If the batteries have already been inserted:
Press and hold the settings button SET on the device
when switched off for approx. 5 seconds.
In this menu you can adjust the following settings in succes-
sion:
Hour
Date
➔ ➔
format
The hour format now flashes on the display.
• Using the +/- setting buttons, select your desired hour
format and confirm with the SET memory button.
The year flashes on the display.
• Using the +/- setting buttons, select your
desired number for the year and confirm
with the SET memory button.
The month flashes on the display.
• Using the +/- setting buttons, select your
desired month and confirm with the SET
memory button.
Time Alarm ➔
➔
The day flashes on the display.
• Using the +/- setting buttons, select your
desired day and confirm with the SET
memory button.
The hour flashes on the display.
• Using the +/- setting buttons, select your
desired number for the hour and confirm
with the SET memory button.
The minute flashes on the display.
• Using the +/- setting buttons, select your
desired number for the minute and confirm
with the SET memory button.
User
You can set 2 different alarm times to remind yourself
to take the measurement. To set the alarm, proceed as
follows:
• Press and hold the function buttons - and + simultane-
ously for 5 seconds.
• Alarm
at the same time. With the function buttons +/-, choose
whether Alarm
deactivated ("off" flashes) and confirm with the setting
button SET.
• If Alarm
/
switch to setting Alarm
24
is shown in the display, "on" or "off" flashes
should be activated ("on" flashes) or
is deactivated ("off") you automatically
.
/