Product Information; Installation - Flash F7200202 User Manual

LED Wall Washer 9x10W RGBW 4in1 DMX 3 sections IP65 • Art No F7200202

3. PRODUCT INFORMATION

Light source:9pcs 12W 4in1 LED
Power supply: AC 110V/240V 50/60Hz,
Switching power supply: 12V 10A
Signal: DMX 512
 3-Pin XLR DMX input/output

4. INSTALLATION

The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit's
5. CONNECTION
The device is equipped with the following
interfaces:
1. DMX (in/out): XLR 3(5)-pin socket
2. Power (in/out): powerCON socket
5.1 Connecting DMX signal
The connection is performed using cable
with XLR-female -> XLR-Male plugs.
Attention! Only 3 devices can be
connected together. Larger amounts
require the use of Splitter.
CAUTION! At the last fixture, the
DMX signal has to be terminated with a
terminator. Solder a 120Ω resistor between
DMX
Controller
 Power consumption: 110 W
 Net Weight: 3kg
Dimensions: H(8)xW(105)xD(15) cm
Dim. (box): H(15)xW(106)xD(13,5) cm
 Weight (box): 3,6 kg
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit
when installing the fixture. The equipment
must be fixed by professionals. And it must
be fixed at a place where is out of the touch
of people and has no one pass by or under
it.
signal (-) and signal (+) into a XLR plug and
plug it in the DMX output of the last fixture.
DMX 512
Max 3 UNITS without the Splitter.
GROUND
1
DMX +
3
DMX -
2
3-pin XLR
FEMALE
XLR
GROUND
DMX -
DMX +
2
1
3
5-pin XLR
5
4
FEMALE
XLR
DMX 512
1
3
2
MALE
XLR
2
1
3
4 5
MALE
XLR