Frequently Asked Questions - Philips AVENT SCD501 User Manual

Hide thumbs Also See for AVENT SCD501:
Table of Contents

Advertisement

Available languages

Available languages

13 Recycling
This symbol means that you must not
throw away the appliance with the normal
household waste. Dispose of the appliance
at an official collection point for electrical
appliances. Correct disposal helps to preserve
the environment.
14 Frequently asked
questions
Why don't the power-on light of the baby unit
and the 'link' light of the parent unit come on
when I press the on/off buttons of the units?
• Perhaps one or both units are not plugged in
properly. Connect the units to an electrical
outlet and press the on/off buttons on both
units for 3 seconds to establish connection
between the parent unit and the baby unit.
• If you use the parent unit on batteries, the
batteries of the parent unit are empty or there
are no batteries in the battery compartment.
Why does the 'link' light on the parent unit flash 
red continuously?
• The baby unit and the parent unit are out
of range of each other. Move the parent unit
closer to the baby unit.
• The baby unit may be turned off. Turn on the
baby unit.
10
Why does the parent unit beep?
• If the parent unit beeps while the 'link' light
flashes red continuously, the connection with
the baby unit is lost. Move the parent unit closer
to the baby unit or turn on the baby unit if it
was off. The baby unit may be turned off. Turn
on the baby unit.
Why does the appliance produce a high-pitched
noise?
• The units may be too close to each other.
Make sure the parent unit and the baby unit are
at least 1 meter/3.5 feet away from each other.
Why don't I hear a sound/Why can't I hear
my baby cry?
• The baby unit and the parent unit may be out
of range of each other. Reduce the distance
between the units.
• You may have set the volume to the lowest
level (mute). Increase the volume.
Why does the parent unit react too quickly to
other sounds?
• The baby unit also picks up other sounds than
those of your baby. Move the baby unit closer
to the baby (but observe the minimum distance
of 1 meter/3.5 feet).
The specified operating range of the baby 
monitor is 300 meters/985 feet. Why does my
baby monitor manage a much smaller distance
than that?
• The specified range is only valid outdoors in
open air. Inside your house, the operating range
is limited by the number and type of walls and/
or ceilings in between. Inside the house, the
operating range is up to 50 meters/150 feet.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avent scd502Avent scd503

Table of Contents